How to Replace the Water Pump and Timing Belt on the Peugeot 308 1.6 HDI

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Pump

See other generations:

This video is currently unavailable

Today's guide will provide the necessary instructions on how to remove and replace the water pump and timing belt on the Peugeot 308 1.6 HDI. First, open the vehicle's engine bonnet and start removing the engine support by unscrewing the fastening bolts; then, lift the vehicle and remove the front right wheel, followed by the wheel arch liner and the V-belt, as shown in the video.

At this point, remove the crankshaft pulley and the timing cover, unscrewing the bolts of the water pump to remove it and replace it with a new one; also replace the timing belt!

Updated on 4 September 2026 by ScegliAuto

Other guides you may be interested in

V Belt - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Pump - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

How to Replace the Water Pump and Timing Belt on the Peugeot 308 1.6 HDI

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos