Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to change the timing belt of the Peugeot 308 1.6 HDI

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Timing belt

Below we will see the steps that will allow us to understand how and when to remove the timing belt of the Peugeot 308 1.6 HDI; on this type of engine, the timing belt must be replaced every 120,000 kilometers or 5 years. So we open the hood and start unscrewing the intake duct and then the engine support; then we lift the car and remove the right front wheel and the fender. At this point we disconnect the serpentine belt and remove the crankshaft pulley, removing the distribution cover; then we proceed to replace the belt, installing the original one.

Posted on 29 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) This guide shows you how to remove and replace the timing belt on the Peugeot 308 1.6 HDI. First, lift the vehicle and remove the front right wheel a…
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos