Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on the Peugeot 308 1.6 HDI

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Timing belt

See other generations:
Video tutorial

This guide shows you how to remove and replace the timing belt on the Peugeot 308 1.6 HDI. First, lift the vehicle and remove the front right wheel and the wheel arch liner; then disconnect the auxiliary belt and remove the crankshaft pulley, as shown in the video.

Next, remove the timing cover to access the belt, taking necessary references for the replacement; install the new original belt and reassemble everything, ensuring the engine timing is correct.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…
When to change the timing belt on the Peugeot 308 1.6 HDI
When to change the timing belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) Below are the steps to understand how and when to remove the timing belt on the Peugeot 308 1.6 HDI; for this type of engine, the timing belt should …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos