Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Pump

Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle and begin by removing the front right wheel and the wheel arch liner; then remove the serpentine belt by loosening the tensioner and the crankshaft pulley, as shown in the video. At this point, remove the timing cover to access the timing belt, taking the necessary references for replacing the belt, and correctly install the original one!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Peugeot 308 1.6 HDI
Replacement of the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the ca…
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) This guide shows you how to remove and replace the timing belt on the Peugeot 308 1.6 HDI. First, lift the vehicle and remove the front right wheel a…
How to Replace the Water Pump and Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) Today's guide will provide the necessary instructions on how to remove and replace the water pump and timing belt on the Peugeot 308 1.6 HDI. First, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos