Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Peugeot 308 1.6 HDI

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Timing belt

Below we will discover the instructions for disassembling and replacing the timing belt of the Peugeot 308 1.6 HDI. First, we open the hood of the car and start disassembling and removing the distribution side engine support and the belt cover, unscrewing all the fixing screws; then we disconnect the serpentine belt, then remove the crankshaft pulley, as shown in the video. At this point, we disconnect the coolant pipe and remove the timing chain, also replacing the water pump.

Posted on 27 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Replacing the Timing Belt and Water Pump on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) Today, let's go through the steps necessary to remove and replace the timing belt and water pump on the Peugeot 308 1.6 HDI. First, raise the vehicle…
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Replacing the Timing Belt on the Peugeot 308 1.6 HDI
Peugeot 308 (2013-2021 / T9, MK 2) This guide shows you how to remove and replace the timing belt on the Peugeot 308 1.6 HDI. First, lift the vehicle and remove the front right wheel a…
When to change the timing belt of the Peugeot 308 1.6 HDI
When to change the timing belt of the Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) Below we will see the steps that will allow us to understand how and when to remove the timing belt of the Peugeot 308 1.6 HDI; on this type of engin…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos