Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

This guide provides instructions to reset the particulate filter (FAP) fluid warning light on a Peugeot Partner Tepee, as well as on a Citroen Berlingo (applicable to Euro 5 PSA group engines). First, get into the vehicle and connect your diagnostic tool to the OBD port of your car; then select the make, model, and engine type, followed by scanning for errors.

Confirm the reset of the FAP fluid warning light after topping up!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) .. the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. First, open the engine bonnet and start by removing the engine mount, unscrewing the.. …
Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Guide to replacing the clutch cable of the Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) .. of the Peugeot Partner Tepee, as well as the Citroen Berlingo. First, we open the hood of the car and begin to disassemble and remove the battery,.. …
Replacing the Number Plate Light on the Peugeot Partner Tepee
Replacing the Number Plate Light on the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) .. on the Peugeot Partner Tepee, as well as on the Citroen Berlingo. First, remove the number plate light cover; use a sharp object like a screwdriver.. …

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - What does the orange triangular warning light mean on the Peugeot Partner? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos