Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: License plate light

See other generations:
Video tutorial

This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgate and begin to remove the panel or interior trim of the tailgate; this will give you access to the number plate bulbs, as shown in the video.

At this point, remove the light fitting to subsequently take out the bulb, replacing it with a new one (with the same fitting); refit and connect the bulb properly, then finally reassemble the tailgate cover!


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Replacing the Number Plate Light on the Peugeot Partner Tepee
Replacing the Number Plate Light on the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) .. on the Peugeot Partner Tepee, as well as on the Citroen Berlingo. First, remove the number plate light cover; use a sharp object like a screwdriver.. …
How to Replace the Third Brake Light Bulb of a Peugeot Partner
How to Replace the Third Brake Light Bulb of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) .. followed for replacing the third brake light on a Citroen Berlingo... …
How to replace the rear lights in the Peugeot Partner van?
How to replace the rear lights in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial we can see how to replace the rear lights in the Peugeot Partner van, an extremely simple and fast operation. First of all, make sur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos