Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Peugeot Partner van?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Peugeot Partner van, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear door, locate the two bolts along the inner edge of the light in question and unscrew them using a Torx key. Then grab the light, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element and follow the reverse procedure.

Posted on 3 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights in a Peugeot Partner van?
How to replace the rear lights in a Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) .. In this tutorial, we can see how to replace the rear lights in the Peugeot Partner van, an extremely simple and quick operation. First.. …
How to Remove the Rear Seats of a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To remove the rear seats of a Peugeot Partner, no special tools are required. First, fully lower the seat backs by pulling the levers next to the hea…
How to Replace the Headlight Bulb on a Peugeot Partner?
How to Replace the Headlight Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the headlight bulb on a Peugeot Partner, open the bonnet to access the circular cap at the rear of the headlamp. Once the cap is removed, …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos