Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in a Peugeot Partner van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear lights in the Peugeot Partner van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely.

Then, open the rear door, locate the two bolts along the inner edge of the light in question and unscrew them using a Torx T20 key. Next, grab the light, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element, and reassemble everything following the reverse procedure.


Posted on 9 August 2025 by ScegliAuto


Related tutorials

How to replace the rear lights in the Peugeot Partner van?
How to replace the rear lights in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial we can see how to replace the rear lights in the Peugeot Partner van, an extremely simple and fast operation. First of all, make sur…
How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgat…
How to Replace the Alternator on a Peugeot Partner?
How to Replace the Alternator on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To replace the alternator on a Peugeot Partner, open the bonnet to access the components inside the engine compartment: you will need to loosen the s…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos