Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to modify a Peugeot Partner to transport a large motorcycle.

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

Let's see what modifications need to be made to a Peugeot Partner to transport a large motorcycle: we start by removing the central seat, then we obtain a plywood panel, which we will cover with carpet for aesthetic reasons. Underneath, we will place wooden supports to level the loading floor.

The usable length is over 2.10 m, plus extra space near the gearbox. This way, the motorcycle is transported lengthwise, with the front wheel between the seats, and it's possible to keep a passenger on board.

It is a low-cost and completely reversible operation. If you want to improve the setup further, we recommend floor anchors for straps and an adjustable wooden/metal wheel chock for the front wheel.

It's better to use marine plywood (15/18 mm thickness), which is sturdier than regular plywood.


Posted on 1 January 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on the Peugeot Partner 3
How to Replace the Remote Battery on the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) If you want to replace the battery inside your Peugeot Partner Mk3 remote, carefully read the following guide and follow the steps described. First, …
How to Replace the Rear Light Bulb on the Peugeot Partner?
How to Replace the Rear Light Bulb on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on the Peugeot Partner, open the rear tailgate to access the corresponding light unit. Loosen the screws next to the l…
Resetting the Service Light on the Peugeot Partner B9
Resetting the Service Light on the Peugeot Partner B9
Peugeot Partner Tepee (2008-2018 / B9) In this video, you will see how the appearance of an orange icon shaped like a spanner on the display at the centre of the Peugeot Partner B9 instrum…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos