Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating control panel bulbs on a Citroen Berlingo or Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Dashboard

How to replace the bulbs of the control panel on a Peugeot Partner (or a Citroen Berlingo)? Follow the video: get a pocket mirror and a 10mm "L" socket wrench, then remove the car radio. Using the mirror, identify the two small square plastic containers on the back of the unit, which contain the two bulbs to be replaced; insert the tip of the wrench into the plastic container and rotate clockwise for a quarter turn and remove the container to prevent it from falling, replace the bulb and cut a piece of cardboard to secure the container to the wrench, because the 9mm wrench is small and the 10mm one is a bit wide: this way we can put it back in place safely, without the risk of losing it. Rotate counterclockwise a quarter turn, turn on the dashboard to check if the bulbs work, and we're done.

Posted on 7 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
How to Replace the Number Plate Light on the Peugeot Partner - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgat…
Gear Oil Replacement on Peugeot Partner - Citroen Berlingo
Gear Oil Replacement on Peugeot Partner - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) In this video, we will see how to replace the transmission oil on a Peugeot Partner, as well as on a Citroen Berlingo. First, lift the vehicle from t…
Replacing the Fuel Filter on Peugeot Partner and Citroen Berlingo
Replacing the Fuel Filter on Peugeot Partner and Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) First, remove the engine intake ducts by releasing the metal clips. At this point, disconnect the connector from the air filter and remove the entire…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos