|
Do it yourself
| |||
| ||||
How to change the time on the Peugeot Partner/Citroen Berlingo
Model: Peugeot Partner Tepee
B9
- Years 2008-2018
To change the date and time on the Peugeot Partner/Citroen Berlingo, turn on the ignition and operate from the stalk behind the steering wheel. Press and hold the two buttons (front and top), find the "display adjust" message, press the top rear button of the stalk, and the year will appear. Change it using the lower or upper button on the stalk, confirm by clicking the wheel, and the month will appear. Change it using the lower or upper button on the stalk, confirm by clicking the wheel, and now the day will appear; repeat the same procedure for the month and year. After changing the day and clicking the wheel, the time will appear, and change it the same way as the minutes (after clicking the wheel). Once everything is changed, press the top rear button of the stalk and turn off the ignition.
Updated on 28 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot Partner Tepee
(2008-2018 /
B9)
In this video we see how to change the time on the Peugeot Partner, as well as on the Citroen Berlingo. We act on the time using the button located a…
Peugeot Partner Tepee
(2008-2018 /
B9)
First, remove the engine intake ducts by releasing the metal clips. At this point, disconnect the connector from the air filter and remove the entire…
Peugeot Partner Tepee
(2008-2018 /
B9)
This guide shows you how to remove and replace the number plate bulb on the Peugeot Partner, as well as the Citroen Berlingo. First, open the tailgat…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.437
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
