Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the dashboard of the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Dashboard

See other generations:
Video tutorial

The Peugeot Partner is the vehicle featured in the presentation video available here, for which it is possible to disassemble the dashboard if necessary. The process begins by removing the steering wheel, first the outer part and then the entire structure through the central locking nut inside.

Next, the plastics behind the steering wheel are removed, followed by the dashboard, the air conditioning controls, the radio, etc., and the process continues by removing the glove compartment, moving towards completion by unscrewing the perimeter pins along the entire dashboard.

It is important to pay attention to the wiring and disconnect it carefully.


Posted on 29 January 2025 by ScegliAuto


Related tutorials

How do you remove the inner panel of the rear door of the Peugeot Partner?
How do you remove the inner panel of the rear door of the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) Finding yourself with a handle to replace, or a broken power window to repair or replace, requires the disassembly of the internal door panel. The op…
How to Replace the Remote Battery on the Peugeot Partner 3
How to Replace the Remote Battery on the Peugeot Partner 3
Peugeot Partner Tepee (2018-2026 / MK 3) If you want to replace the battery inside your Peugeot Partner Mk3 remote, carefully read the following guide and follow the steps described. First, …
How to Adjust the Dashboard Brightness on a Peugeot Partner
How to Adjust the Dashboard Brightness on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) In this video, see how to adjust the brightness on the dashboard of a Peugeot Partner: at the base of the dashboard, on the right side of the rev cou…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos