Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the inner panel of the rear door of the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Door trim panel

See other generations:
Video tutorial

Finding yourself with a handle to replace, or a broken power window to repair or replace, requires the disassembly of the internal door panel. The operational steps for these tasks, both for the front and rear doors, are practically identical, so let's move on to watching the uploaded video: We start with the internal opening handle, attached to the grip handle, unscrewing the two screws nearby, then we move on to the perimeter screws, keeping in mind that a Torx key is needed to operate, and finally with a lever, preferably those used by body shops, the entire panel is detached.


Posted on 23 May 2025 by ScegliAuto


Related tutorials

How to remove the door panel of a Peugeot Partner
How to remove the door panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open the door of your Peugeot Partner. Begin by prising out and removing the insert of the internal handle using a thin but sturdy t…
How to replace the rear light bulb on the Peugeot Partner?
How to replace the rear light bulb on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) Replacing one of the bulbs in a vehicle's lighting system is usually not as complex as it may seem, so you can try it yourself. For example, on the P…
Disassembly of the rear tailgate panel of the Peugeot Partner Tepee
Disassembly of the rear tailgate panel of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today we will see the main instructions that will allow us to disassemble and remove the internal panel of the rear door of the Peugeot Partner Tepee…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos