Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Door trim panel

Before starting, open the door of your Peugeot Partner. Begin by prising out and removing the insert of the internal handle using a thin but sturdy tool. Next, unscrew and remove all the screws securing the door panel. Then, prise off and remove the cover located near the wing mirror. At this point, unclip the internal hooks that secure the panel, then pull away the panel and disconnect the speaker's electrical connector to successfully complete the removal.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
Disassembly of the front door panel of the Peugeot Partner Tepee.
Disassembly of the front door panel of the Peugeot Partner Tepee.
Peugeot Partner Tepee (2008-2018 / B9) These instructions will allow us to disassemble and replace the front door panel of the Peugeot Partner Tepee. First, we open the front door and begi…
How to install the door panel of the Peugeot Partner
How to install the door panel of the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) After previously removing the door panel of the trunk of the Peugeot Partner Tepee, it is necessary to install a new panel. Since there are no connec…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos