Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Dashboard Brightness on a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Instrument cluster

See other generations:
Video tutorial

In this video, see how to adjust the brightness on the dashboard of a Peugeot Partner: at the base of the dashboard, on the right side of the rev counter, there is a button that adjusts the brightness of the display by holding it down: in this way, you will see the display gradually decrease in brightness.

If you release the button and then press it again, you will see that the brightness increases slowly.

Adjust it according to your preferences, keeping in mind that a display that is too bright can distract you from driving at night and can therefore be counterproductive.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Peugeot Partner
How to Reset the Service Light on the Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) This short video illustrates the procedure to reset the service light on the 2015 Peugeot Partner. The procedure takes only a few seconds and require…
How to reset the service light on the 2014 Peugeot Partner
How to reset the service light on the 2014 Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) If you have a 2014 Peugeot Partner and are wondering how to perform the manual reset procedure for the service light, then all you need to do is foll…
How to Reset the Service Light on a Peugeot Partner?
How to Reset the Service Light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To correctly reset the Service light displayed on the instrument panel of the Peugeot Partner, press and hold the button located at the bottom left o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos