|
Do it yourself
| |||
| ||||
How to Replace the Passenger Airbag in a Peugeot Partner
Model: Peugeot Partner Tepee
B9
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Learn how to replace the passenger airbag in a Peugeot Partner (also applicable to the Citroen Berlingo), located on the dashboard above the passenger glove compartment, which you will need to remove. When working around airbags, it is essential to disconnect the negative battery cable, then wait at least 15-20 minutes to allow the capacitors to discharge completely. Then you can proceed: the glove compartment has two plastic pins acting as hinges; remove them from their housing using a flat screwdriver. Behind the glove compartment, you will find the airbag support panel, secured with 4 screws of 10 mm, which you will remove. Disconnect the power connector (do so carefully) and remove the airbag: lift and remove the part that physically contains the airbag; it is usually held in place by a clip. Once the module is extracted, disconnect the last connector and replace it with the new one.
Posted on 27 August 2026 by ScegliAuto
Related tutorials
Peugeot Partner Tepee
(2008-2018 /
B9)
To remove the steering wheel airbag from the Peugeot Partner, you need to get inside the vehicle and rotate the steering wheel to a horizontal positi…
Peugeot Partner Tepee
(2018-2026 /
MK 3)
In this video, we see how to disassemble the steering wheel and airbag of the Peugeot Partner; the same procedure is also valid for the Peugeot 206 a…
Peugeot Partner Tepee
(2008-2018 /
B9)
In this video, we see how to remove the horn of a Peugeot Partner: first, we need to remove the airbag from the steering wheel, pressing with small s…
Other guides you may be interested in
|
Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?
The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.080
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
