Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the horn of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we see how to remove the horn of a Peugeot Partner: first, we need to remove the airbag from the steering wheel, pressing with small screwdrivers on the holes on the outer sides of the steering wheel; of course, before doing this job, disconnect the negative pole of the battery.

Then, we lever on the sides of the airbag and disconnect the electrical connector that connects the airbag to the network.

Behind, we notice that there are two rods that needed to be cleaned and put back in their original position; evidently, in use, they had taken strong blows and had moved from their original position. It was enough to put them back in place and now everything is ok.


Posted on 11 April 2025 by ScegliAuto


Related tutorials

Where is the Horn Fuse on the Peugeot Partner Tepee?
Where is the Horn Fuse on the Peugeot Partner Tepee?
Peugeot Partner Tepee (1996-2013 / MK 1) The horn fuse on the Peugeot Partner Tepee is located inside the fuse box in the front bonnet. The fuse in question is marked with the number 13 and …
How to Dismantle the Horn on Peugeot Partner Tepee
How to Dismantle the Horn on Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, you will learn how to dismantle the horn on a Peugeot Partner Tepee by following the instructions below. Locate the horn unde…
Guide to disassembling the horn of the Peugeot Partner Tepee
Guide to disassembling the horn of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the horn or the acoustic warning of the Peugeot Partner Tepe…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos