Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Horn Fuse on the Peugeot Partner Tepee?

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuse box

See other generations:
Video tutorial

The horn fuse on the Peugeot Partner Tepee is located inside the fuse box in the front bonnet. The fuse in question is marked with the number 13 and is 15 Amperes.

To replace it in case the horn has stopped working, open the bonnet, access the fuse box, and remove the fuse using needle-nose pliers. Insert a new fuse with the same amperage and close the fuse box cover.

Test the horn operation and close the bonnet. If the horn does not work, the issue may lie with the horn connector located inside the engine bay.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Guide to disassembling the horn of the Peugeot Partner Tepee
Guide to disassembling the horn of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the horn or the acoustic warning of the Peugeot Partner Tepe…
Where is the Windscreen Wiper Fuse on the Peugeot Partner?
Where is the Windscreen Wiper Fuse on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The Peugeot Partner Tepee has two fuse boxes inside. The fuse for the windscreen wiper is located in the fuse box under the bonnet; when the wiper st…
How to Dismantle the Horn on Peugeot Partner Tepee
How to Dismantle the Horn on Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, you will learn how to dismantle the horn on a Peugeot Partner Tepee by following the instructions below. Locate the horn unde…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos