Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Horn on Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years 2008-2018

In this video tutorial, you will learn how to dismantle the horn on a Peugeot Partner Tepee by following the instructions below. Locate the horn under the bumper on the driver's side; it is advisable to remove the front left wheel for easier access. Once located, unscrew the three fixing screws; then disconnect the electrical connector to remove it, as illustrated in the video. At this point, replace it with the new one by connecting the electrical connector and checking its operation before reassembly!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the horn of the Peugeot Partner Tepee
Guide to disassembling the horn of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this guide we will see the instructions that will allow us to disassemble and replace the horn or the acoustic warning of the Peugeot Partner Tepe…
Where is the fuse for the horn of the Peugeot Partner Tepee located?
Where is the fuse for the horn of the Peugeot Partner Tepee located?
Peugeot Partner Tepee (1996-2013 / MK 1) The horn fuse of the Peugeot Partner Tepee is located inside the fuse box in the front hood. The fuse in question is indicated with the number 13 at …
How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) In today's tutorial, you will learn how to dismantle the turbocharger on a Peugeot Partner Tepee with a 1.6 HDI engine. First, open the bonnet and di…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the horn relay located on the Peugeot Partner? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos