Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Diesel Particulate Filter from the Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Diesel particulate filter

This guide will show you how to remove and replace the diesel particulate filter (DPF) of the Peugeot Partner Tepee HDI, following the instructions below. First, open the bonnet and begin to remove the metal shield of the turbocharger and the DPF by unscrewing the fixing screws; then unscrew the screws of the DPF, separating it from the turbo, as shown in the video. At this point, replace the faulty diesel particulate filter; reassemble and secure everything correctly, applying the reverse procedure of disassembly!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you clean the particulate filter of the Peugeot Partner?
How do you clean the particulate filter of the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In order to clean the particulate filter of the Peugeot Partner, you need to access the bottom of the vehicle, in the exhaust area between the tailpi…
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter of our Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To reach it, you will need to bend down …
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) This guide provides instructions to reset the particulate filter (FAP) fluid warning light on a Peugeot Partner Tepee, as well as on a Citroen Berlin…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos