Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you clean the particulate filter of the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Diesel particulate filter

In order to clean the particulate filter of the Peugeot Partner, you need to access the bottom of the vehicle, in the exhaust area between the tailpipe and the catalytic converter: in this area the filter will be present, which must be freed from its seat by loosening the screws that secure its housing. The particulate filter inside can be removed so that it can be cleaned or possibly replaced with a new one; after the replacement, it will be possible to reinsert the filter into its seat, mounting it and verifying that everything works correctly.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up AdBlue on the Peugeot Partner?
How to Top Up AdBlue on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To top up AdBlue on the Peugeot Partner, open the bonnet to access the components inside the engine bay: at the front, between the battery and the ra…
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter of our Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To reach it, you will need to bend down …
Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos