Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

DPF Replacement on Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Diesel particulate filter

See other generations:
Video tutorial

The cover of the diesel particulate filter is secured at the rear by two small screws located between it and the engine compartment (a long socket will be needed) and by a more visible screw at the front. Carefully remove the cover as the spaces are quite tight.

Unscrew the filter retaining bolt with a socket wrench, as shown in the video, and the main connector with a spanner. Unscrew the remaining ducts and connectors attached to the DPF; otherwise, you will not be able to remove it. Finally, unscrew the two bolts that secure it to the lower brackets.

You can now remove the filter.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
How to Reset the FAP Fluid Warning Light on a Peugeot Partner Tepee - Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) This guide provides instructions to reset the particulate filter (FAP) fluid warning light on a Peugeot Partner Tepee, as well as on a Citroen Berlin…
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos