Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Turbocharger on a Peugeot Partner Tepee 1.6 HDI

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013
Part: Turbocharger

In today's tutorial, you will learn how to dismantle the turbocharger on a Peugeot Partner Tepee with a 1.6 HDI engine. First, open the bonnet and disconnect the intake hose from the turbocharger by unscrewing the clamp screws; then lift the vehicle and drain the engine oil, also removing the oil filter. At this point, disconnect the exhaust manifold from the turbocharger, disconnect the electrical connector, and unscrew all the bolts; now proceed with the final removal of the turbocharger, following the video tutorial to the end!

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Peugeot Partner Tepee (1996-2013 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the engine cooling circuit of the Peugeot…
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Replacing the Timing Belt on the Peugeot Partner Tepee - Citroen Berlingo 1.6 HDi
Peugeot Partner Tepee (2008-2018 / B9) Today's information will show you how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDi, as well as the Citroen Berlingo. Fi…
How and When to Replace the Timing Belt on the Peugeot Partner Tepee 1.6 HDI
How and When to Replace the Timing Belt on the Peugeot Partner Tepee 1.6 HDI
Peugeot Partner Tepee (1996-2013 / MK 1) Today's guide will provide useful information on how to remove and replace the timing belt on the Peugeot Partner Tepee 1.6 HDI. For this type of eng…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos