Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Peugeot Partner Tepee

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil in a Peugeot Partner Tepee, park the vehicle on a level surface and safely lift it to access the underside of the engine. Place a container under the oil sump and unscrew the filler cap located at the top of the engine.

Then remove the drain plug located under the sump and allow the used oil to drain completely into the container. Once the drainage is complete, re-screw the drain plug, ensuring the seal is in good condition.

Pour the new oil through the filler neck using the quantity specified for the installed engine. Check the level with the dipstick and adjust if necessary.

Start the engine for a few moments, turn it off, and check the oil level again, ensuring there are no leaks around the drain plug.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Peugeot Partner
How to Change the Engine Oil on a Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) To change the engine oil on a Peugeot Partner, access the underside of the engine bay, where you will find the oil drain plug: this should be unscrew…
How to Change the Oil on a Peugeot Partner 2
How to Change the Oil on a Peugeot Partner 2
Peugeot Partner Tepee (2008-2018 / B9) The guys in this video teach us how to change the engine oil in the Peugeot Partner 2 and first suggest using a pre-change cleaner just before draini…
Resetting the service indicator light of the Peugeot Partner Tepee.
Resetting the service indicator light of the Peugeot Partner Tepee.
Peugeot Partner Tepee (2018-2026 / MK 3) In this guide we will see the information that will allow us to reset the service light of the regular maintenance of the oil change of the Peugeot P…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos