Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

Let’s see how to remove and replace the engine air filter on a Peugeot Partner Tepee: open the car door, pull up the lever to open the engine compartment located at the bottom left of the dashboard, and lift the front bonnet. Secure it with the prop rod. Remove the engine soundproofing panel, then open the air kit (unscrew the securing screws with the appropriate tool) and uncover the filter box cap to extract the filter.

Insert a new filter into the designated housing, ensuring it fits snugly around the edges. Finally, reassemble the air box cap and tighten the screws.

Close the front bonnet after maintenance.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Peugeot Partner Tepee
How to Replace the Air Filter on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Replacing the air filter on a 2016 Peugeot Partner Tepee is a simple and quick operation. You need to: - open the front bonnet and cover the bodywork…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
Removing the Diesel Particulate Filter from the Peugeot Partner Tepee
Removing the Diesel Particulate Filter from the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This guide will show you how to remove and replace the diesel particulate filter (DPF) of the Peugeot Partner Tepee HDI, following the instructions b…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos