Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Peugeot Partner 2020

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you will see where the drawer containing the cabin air filter is located in the Peugeot Partner. In this case, it is a right-hand drive vehicle, so the drawer is located under the steering wheel, near the pedals.

You need to remove the plastic cover between the steering wheel and the pedals, and access the duct to reach the filter. Remove it, and try to clean the compartment of dust and debris using a vacuum cleaner extension.

Insert the new filter, ensuring the correct fitting direction, and then close the cover. For left-hand drive vehicles, the filter position does not change: it is still located under the glove compartment.


Posted on 7 June 2026 by ScegliAuto


Related tutorials

Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…
How to replace the cabin air filter of the 2019 Peugeot Partner
How to replace the cabin air filter of the 2019 Peugeot Partner
Peugeot Partner Tepee (2018-2026 / MK 3) Below we will discover together the steps you need to follow in order to correctly replace the cabin air filter in your Peugeot Partner Mk3 (2019). F…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos