Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Cabin air filter

The cabin air filter for this model is located just behind the central console of the dashboard, at the bottom: to replace it, access from the passenger side and remove the panel directly below the glove compartment, above the footrest, then disassemble the glove compartment itself; at this point, you will be able to reach the cap of the filter housing next to the white plastic duct; remove the cap, extract the old filter, clean any dirt residues, and insert the new filter, then reverse the steps to reassemble all components.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Where is the cabin filter located and how can it be reached in a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter of our Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To reach it, you will need to bend down …
Removing the Cabin Air Filter on a Peugeot Partner
Removing the Cabin Air Filter on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Do you want to replace the pollen filter on a Peugeot Partner? Open the door and remove the cover plastics to change the filter. Use a screwdriver to…
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos