Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on a Peugeot Partner 2

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

See other generations:
Video tutorial

Open the engine compartment by lifting the front bonnet (after releasing it from the lever inside the cabin) and securing it. Remove the cap of the H4 bulb for the dipped and main beams and pull off the electrical connector, then detach the retaining tab and extract the bulb.

After inserting the new one, taking care not to touch the glass with your fingers, reposition the tab, connector, and plastic cap. Repeat the same operation for the parking lights and the indicator lights.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and…
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see how to replace the headlight bulbs on the Peugeot Partner van, a very simple and quick operation. First, ensure that t…
How to Replace the Battery on a Peugeot Partner Tepee
How to Replace the Battery on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, learn how to replace the battery on a Peugeot Partner Tepee. Start by opening the bonnet and immediately disconnect the negat…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos