Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this video tutorial, learn how to replace the battery on a Peugeot Partner Tepee. Start by opening the bonnet and immediately disconnect the negative terminal of the battery.

Using a 13mm socket, unscrew the two front screws of the wiring mounted on the battery cover, remove the various cables, and finally take off the battery cover. Once this is done, disconnect the positive terminal of the battery, and still using the socket, remove the bolt at the base of the battery that holds it in position.

Then extract the old battery and fit a new one by following the procedure in reverse.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Battery on a Peugeot Partner Tepee
How to Remove and Replace the Battery on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, learn how to remove and replace the engine battery on a Peugeot Partner Tepee, in simple and quick steps. First, open the bon…
How to Replace the Battery in the Peugeot Partner Tepee
How to Replace the Battery in the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Today, discover the instructions that will allow you to remove and replace the battery in the Peugeot Partner Tepee, as well as the Citroen Berlingo.…
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos