Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and open the boot; then use a Torx screwdriver to unscrew the fixing screws located on the sides, removing the rear headlamp (also disconnecting the electrical connector of the bulbs), as shown in the video.

At this point, remove the bulbs from the housing and replace them with new ones of the correct type; insert the bulb holder back into the housing and reassemble everything!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…
How to Remove the Rear Headlamp Bulb on a Peugeot Partner
How to Remove the Rear Headlamp Bulb on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open and unclip the rear doors of the load area of your Peugeot Partner. Begin by unscrewing and removing the screws that secure the…
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
How to Replace the Headlight Bulb on a Peugeot Partner Tepee
Peugeot Partner Tepee (2018-2026 / MK 3) In this video tutorial, you can observe the steps to replace the headlight bulb on a Peugeot Partner Tepee. Get inside the vehicle, pull the lever ne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos