Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Headlight bulb

Working with the engine off and the handbrake engaged, lift the bonnet and insert the support rod. The video shows you how to replace each bulb in the front headlamp, starting with the dipped beam: remove the round dust cover located behind the headlamp, towards the engine bay. Disconnect the bulb connector by gripping it at the sides and pulling it out. Release the small metal clip that holds the bulb in place. For fitting the new bulb, simply reverse the process. Check its operation.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on the Peugeot Partner Van?
How to Replace the Headlight Bulbs on the Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will see how to replace the headlight bulbs on the Peugeot Partner van, a very simple and quick operation. First, ensure that t…
Replacing the Number Plate Light on the Peugeot Partner Tepee
Replacing the Number Plate Light on the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In this video tutorial, you will learn how to remove and replace the number plate light on the Peugeot Partner Tepee, as well as on the Citroen Berli…
Replacement of the front headlight bulb of the Peugeot Partner Tepee
Replacement of the front headlight bulb of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) This brief guide will show us the information that will allow us to disassemble and replace the headlight bulb of the Peugeot Partner Tepee. First, w…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos