Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Peugeot Partner

Model: Peugeot Partner Tepee MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
Video tutorial

Replacing the rear headlight bulbs of the Peugeot Partner is a simple and quick operation to be carried out independently. First, we open the trunk of the vehicle and then, using a 20 mm key, we unscrew the side nuts of the headlight in order to release it. We release the headlight once the blocks are removed and remove the light cover.

We replace the damaged bulbs and reassemble the light cover. We position the headlight in its housing and screw in the locking nuts.

We turn on the vehicle lights to test the operation of the bulbs, otherwise it may be necessary to replace the relevant fuse.


Posted on 31 March 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…
How to Replace a Bulb in the Rear Light of a 2020 Peugeot Partner?
How to Replace a Bulb in the Rear Light of a 2020 Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) Let's see how to replace a bulb in one of the rear lights of the 2020 Peugeot Partner. Specifically, we will change the bulb in the rear light by fol…
How to Replace the Rear Light Bulb on the Peugeot Partner?
How to Replace the Rear Light Bulb on the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on the Peugeot Partner, open the rear tailgate to access the corresponding light unit. Loosen the screws next to the l…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos