Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Key

See other generations:
This video is currently unavailable

Start by pressing the silver button on top to open the physical key of your Peugeot Partner. Next, insert the tip of a small flathead screwdriver into the lower slot of the key and lever it open.

This will split the key in two, giving you access to the exhausted battery. To remove it, simply unclip it from its housing, and you will have completed the removal.

Now, to install the new battery and close the electronic key, simply reverse these steps, and you will have finished the replacement. The battery in question is a CR1620.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Start by pressing the silver button on the top of the key to open the physical key of your Peugeot Partner. Next, insert the tip of a small flathead …
How to Replace the Key Battery of a Peugeot Partner
How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) How do you replace the battery in the remote key of a Peugeot Partner? Let's see how to proceed in this guide. Take your remote and use a lever to se…
How to replace the remote battery of the Peugeot Partner?
How to replace the remote battery of the Peugeot Partner?
Peugeot Partner Tepee (1996-2013 / MK 1) To replace the remote battery of the Peugeot Partner, loosen the screw located on the back of the device, just below the base of the key: once this s…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos