Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Key

Start by pressing the silver button on the top of the key to open the physical key of your Peugeot Partner. Next, insert the tip of a small flathead screwdriver into the slot at the bottom of the key and lever it open. This will separate the key into two halves, exposing the dead battery. To remove it, simply unclip it from its holder, completing the removal. To install the new battery and reassemble the electronic key, simply reverse these instructions. The battery required is a CR1620, with an average price of £3 to £4 each.

Updated on 2 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Start by pressing the silver button on top to open the physical key of your Peugeot Partner. Next, insert the tip of a small flathead screwdriver int…
How to Replace the Key Battery of a Peugeot Partner
How to Replace the Key Battery of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) How do you replace the battery in the remote key of a Peugeot Partner? Let's see how to proceed in this guide. Take your remote and use a lever to se…
How to replace the battery in a Peugeot Partner?
How to replace the battery in a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the battery in a Peugeot Partner, open the bonnet to access the battery located on the right side of the engine bay, just below the windsc…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos