Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Microcar Mgo

Model: MG MG Various
Part: Service warning light

Today, discover how to reset the service light for the routine maintenance oil change on the Microcar Mgo by following the instructions below. First, get inside the vehicle and ensure all doors are closed; then, turn on the instrument panel by pressing the button near the gear lever, and press and hold the button on the instrument panel to reset the oil change maintenance light, as shown in the video. Finally, turn off the panel and start the engine!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the MG 6?
How to Reset the Service Light on the MG 6?
MG MG Various This tutorial shows how to reset the service light on the MG 6, a very simple and quick operation to perform only after completing all scheduled main…
How to Reset the Service Light in a MG GS
How to Reset the Service Light in a MG GS
MG MG Various In this tutorial, you will see how to reset the service light in the MG GS, a very simple and quick operation to perform only after completing all re…
How to reset the AdBlue warning light in an MG?
How to reset the AdBlue warning light in an MG?
MG MG Various If the AdBlue warning light has turned on in the instrument panel of our MG, it means that the pollution control system liquid has reached the minimu…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos