Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the panoramic roof of the Volkswagen Jetta

Model: Volkswagen Jetta A4, MK 4 - Years 1998-2005

Today we will discover the step-by-step instructions that will allow us to disassemble and replace the panoramic roof of the Volkswagen Jetta. First of all, we climb aboard the passenger compartment and start by removing the plastic ceiling light fixture; then we remove the panoramic roof seal and unscrew the fastening screws that we find on the sides, as shown in the video. At this point, it will be possible to gently detach our panoramic roof, removing it and replacing it if necessary with a new one; we apply the reverse procedure for reassembling the panoramic roof!

Posted on 14 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the interior roof lining of the Volkswagen Jetta
How to remove the interior roof lining of the Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) Below we will see the instructions useful for disassembling and replacing the headliner or the interior lining of the roof of the Volkswagen Jetta. F…
Where Are the Fuses on a Volkswagen Jetta?
Where Are the Fuses on a Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) The fuses on the Volkswagen Jetta are located within the designated fuse boxes installed in the vehicle. In this model, you can find two fuse boxes. …
How to Remove the Roof Lining on the Volkswagen Golf 5 - Jetta
How to Remove the Roof Lining on the Volkswagen Golf 5 - Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) In this video tutorial, you will see the main instructions for removing the roof lining on the Volkswagen Jetta MK5, as well as on the Golf 5. First,…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos