Do it yourself
Frequently asked questions about cars and motorcycles

Layout and positioning of internal fuses of the Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Today we will discover information regarding the layout and positioning of the internal fuse box of the Volkswagen Caddy. First, we open the front door of the vehicle, on the driver's side, and start removing the plastic cover found under the light switch; inside we will find the fuse box, as shown in the video.

At this point, we usually find the fuse diagram and chart inside the cover, also available in the vehicle's user manual; here we find all the codes and amperages of the fuses, as well as the diagram and positioning of the various relays.


Posted on 23 March 2025 by ScegliAuto


Related tutorials

Volkswagen Caddy (2003-2020 / 2K, MK 3) Today, we will look at the positioning and layout of the internal fuses of the Volkswagen Caddy, following the instructions provided below. First, op…
Volkswagen Caddy (2020-2026 / SB) Today's instructions will allow us to access the internal fuse box of the Volkswagen Caddy, also finding the fuse diagram and chart. First, we open t…
Volkswagen Caddy (2020-2026 / SB) Today we will discover the information regarding the positioning and the fuse layout of the Volkswagen Caddy. First, we open the hood of the car to a…

    Frequently Asked Questions

    • Caddy 2003-2020 - Where is the windshield washer pump fuse located in the Caddy? Read answer
    • Caddy 2003-2020 - Where is the Volkswagen Caddy central locking fuse located? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos