Do it yourself
Frequently asked questions about cars and motorcycles

How to Access the Internal Fuse Box and Relays of the Volkswagen Caddy

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

Today we will see the instructions that will allow us to access the internal fuse box and relays of the Volkswagen Caddy. First, get into the vehicle on the driver's side and begin removing the plastic cover found at the bottom left, under the indicator stalk; inside you will find the fuses and the main relays, as illustrated in the video.

At this point, you will usually find the fuse diagram inside the cover, which can also be found in the vehicle's user and maintenance manual; the diagram contains all the codes and amperages of the fuses!


Posted on 11 February 2026 by ScegliAuto


Related tutorials

Volkswagen Caddy (2020-2026 / SB) The fuse box of a Volkswagen Caddy is located in the engine bay, near the right side. To access it, open the front bonnet of your Volkswagen Caddy an…
Volkswagen Caddy (2003-2020 / 2K, MK 3) Today, let's discover how to access the internal fuse box of a Volkswagen Caddy in simple steps. First, open the front left door of the vehicle and s…
Volkswagen Caddy (2020-2026 / SB) Today's instructions will allow us to access the internal fuse box of the Volkswagen Caddy, also finding the fuse diagram and chart. First, we open t…

    Frequently Asked Questions

    • Caddy 2003-2020 - Where is the windshield washer pump fuse located in the Caddy? Read answer
    • Caddy 2003-2020 - Where is the Volkswagen Caddy central locking fuse located? Read answer

How to Replace the Starter Motor on an Opel Corsa?

In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos