Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Volkswagen ID 4?

Model: Volkswagen Id 4 MK 1 - Years 2020-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Volkswagen ID 4, switch on the ignition to access the menu on the central display: select "Vehicle" and then "Tyre pressure". If the tyres are at the correct pressure, as indicated on the sticker on the driver's door pillar, press "SET". This will allow the tyre pressure to be rechecked by the sensors: to make the warning light disappear, switch off and then switch on the ignition again.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure light on a Volkswagen ID4
How to reset the tyre pressure light on a Volkswagen ID4
Volkswagen Id 4 (2020-2026 / MK 1) If the orange tyre pressure light appears on the instrument panel of your Volkswagen ID4 and you want to reset it manually, follow these steps. First…
How to Reset the TPMS Light on the Volkswagen ID 4
How to Reset the TPMS Light on the Volkswagen ID 4
Volkswagen Id 4 (2020-2026 / MK 1) .. In this guide, we will discover how to reset the tyre pressure warning light on the Volkswagen ID 4; before recalibrating the TPMS sensors,.. …
How to reset the tire pressure warning light on the 2021 Volkswagen ID4
How to reset the tire pressure warning light on the 2021 Volkswagen ID4
Volkswagen Id 4 (2020-2026 / MK 1) If you own a 2021 Volkswagen ID 4 and want to manually reset the tire pressure warning light, all you have to do is follow the procedure described be…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos