Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. :
  5. Id 4
  6. : Installation guide for DIY Draw-Tite hitch on Volkswagen ID 4.

Volkswagen Id 4 - Video tutorial

Model: Volkswagen Id 4 MK 1 - Years 2020-2024
Operation: Installation guide for DIY Draw-Tite hitch on Volkswagen ID 4.

As shown in the video for installing the tow hook on the Volkswagen Id 4, you will need to remove the 6 screws that hold the outer part under the trunk. Remember to also remove the two screws located further inside under your car as shown in the video. Remove the plastic wheel cover and unscrew two more screws for each wheel. Unscrew all necessary screws as shown in the video, including the license plate. Detach the entire bumper by disconnecting the connector. Unscrew some more bolts and position your tow hook. Screw in bolts and bolts so that the hook is secure. Perform all operations exactly the opposite of what you did at the beginning.


Posted on 13 May 2023 by ScegliAuto

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos