Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Volvo V70 -

Volvo V70 (2007-2016 / mk 3)

Volvo V70 (2007-2016 / MK 3)
How to Reset the Tyre Warning Light on a Volvo V70?
In this tutorial, you will see how to reset the tyre warning light on a Volvo V70, a very simple and quick operation, to be performed only after restoring the …Read all…
Posted on 7 February 2026 by ScegliAuto
Volvo V70 (2007-2016 / MK 3)
How to Reset the Tyre Warning Light on the Volvo V70
To reset the tyre warning light on your Volvo V70 third generation (2007-2016), follow the steps in this guide. First, enter the cabin and switch on the …Read all…
Posted on 25 August 2026 by ScegliAuto
Airbag (1) Speaker (1) Car stereo (7) Battery (1) Bushings (1) Control arm (1) Transmission (2) Body (4) Key (3) Timing belt (9) V-belt (2) Onboard computer (1) Checks and maintenance (3) Throttle body (1) Dashboard (1) Bearing (1) Brake rotors (2) Headlight (5) Tail light (1) Air filter (3) Cabin air filter (2) Fuel filter (3) Diesel fuel filter (3) Parking brake (3) Fuel injectors (1) Accessory kit (6) Light bulb (3) Side marker bulb (2) Headlight bulb (3) Interior dome light bulb (2) License plate light (1) Starter motor (2) Brake fluid (1) Engine oil (2) Door trim panel (4) Shift knob (1) Fuel pump (2) Power window switch (2) Instrument cluster (3) Radiator (2) Heater core (2) Fuse box (17) Seat (2) Door lock (1) Suspension system (1) Side mirror (5) Warning light – error code (1) (2) Tire pressure warning light (1) Service warning light (29) Windshield wipers (1) Center console tunnel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos