How to Dismantle the Rear View Mirror on a Yamaha MT-09

Model: Yamaha Mt 09
Part:

This video is currently unavailable

Learn how to dismantle the rear view mirror on a Yamaha MT-09 (right side). Unscrew the tightening bolt using a suitable spanner.

Once the bolt is loosened, unscrew it by hand (use the mirror as a lever). To reassemble: screw the mirror with the bolt into the thread above the handlebars; hold the mirror with one hand and tighten the nut with the spanner using the other hand.

Finally, test the correct functioning of the mirror, adjusting the view while on the bike and the angle with an Allen key.

Updated on 7 March 2026 by ScegliAuto

Related tutorials

How to Change the Engine Oil in a Yamaha MT-09?

Mt 09 In this tutorial, you will see how to change the engine oil in a Yamaha MT-09, a very simple and quick operation. First, ensure that the engine is co…

How to Change the Engine Oil in the Yamaha MT-09?

Mt 09 To change the engine oil in the Yamaha MT-09, loosen the drain plug located at the central lower part of the bike to allow all the used oil to flow i…

How do you set the clock on the Yamaha MT-09?

Mt 09 The clock on the Yamaha MT-09 can be adjusted by turning on the instrument panel, inserting the key into the ignition switch: once the instrument pan…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!

by ScegliAuto

How to Dismantle the Rear View Mirror on a Yamaha MT-09

Related tutorials

How to Clean the Throttle Body on a Piaggio Beverly

More videos