Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Yamaha MT 09

Model: Yamaha Mt 09
Part: Battery

Video tutorial

To replace the battery on this motorcycle model, the Yamaha MT 09, first remove the seat. This maintenance task is very simple and quick, as the only thing holding the battery in place is a strap that you will need to unclip.

At this point, you can proceed by unscrewing the 10 mm screws and then disconnecting the terminals, remembering to always disconnect the negative terminal first and then the positive. Remove the old battery and insert the new one, then work in reverse until everything is reassembled.

This is a very straightforward operation, good luck!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Yamaha MT-09
How to Replace the Battery on a Yamaha MT-09
Mt 09 Below are the steps to remove and replace the battery on a Yamaha MT-09 motorcycle, following the instructions provided. First, place your motorcycle…
How to Replace the Battery on the Yamaha MT-09
How to Replace the Battery on the Yamaha MT-09
Mt 09 To replace the battery on the Yamaha MT-09, you need to completely remove the seat from its housing. Once the seat is removed, you can locate the bat…
How to replace the motor oil in the Yamaha MT-09?
How to replace the motor oil in the Yamaha MT-09?
Mt 09 In this tutorial we can see how to replace the engine oil in the Yamaha MT-09, a very simple and quick operation. First of all, make sure that the en…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos