Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz6
Part: Wheel

Discover how to remove the rear wheel of the Yamaha FZ6, including the Fazer version, by following the instructions below. First, place the central stand under your bike; then, undo the nut of the central wheel spindle using a socket spanner, as shown in the video. At this point, gently remove the drive chain and then the brake caliper found on the other side; extract the wheel and, if necessary, replace the tyre. Apply the reverse procedure for reassembly!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
Fz6 These short and simple instructions will show us how to access the fuse box of the Yamaha FZ6 motorcycle, as well as the FZ6 Fazer. First, we put the…
Fz6 To replace the rear brake pads on the Yamaha FZ6, first loosen the screws securing the brake caliper corresponding to the disc: once these screws are…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos