Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : How to deactivate the passenger airbag on the Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Airbags
Operation: How to deactivate the passenger airbag on the Peugeot 206

When it comes to a Peugeot 206 vehicle, temporarily suspending the operation of the passenger side airbag is a simple and quick operation. To suspend the airbag, we need to insert the driver's key into the lock located near the steering wheel on the left side. By doing this, the safety system is deactivated, and to reactivate it, you will need to perform the same step. The system should only be deactivated in exceptional cases, such as when transporting a child in a baby seat on the right front seat or when performing maintenance work on the vehicle.


Posted on 18 March 2024 by ScegliAuto



Remove steering wheel airbag on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the steering wheel airbag of a Peugeot 206? Let's see how the airbag is removed from above the car's steering wheel. We disconnect the
Remove the steering wheel airbag of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this very short video tutorial we can see how to remove the steering wheel airbag of a Peugeot 206, before starting this operation it is very impo
Removing the airbag and horn button Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video we will see how to remove the driver's airbag and, consequently, the horn button of a Peugeot 206, following these simple instructio

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos