Do it yourself
Frequently asked questions about cars and motorcycles
Does A Bmw 1 Series Have A Spare Wheel


Where is the spare wheel located in the BMW 1 Series?
Answer: The BMW 1 Series is not equipped with either a spare wheel or a small wheel. Unfortunately, given the overall dimensions deriving from rear-wheel driv... Read all

Posted on 17-08-2022

Read answer
Where is the BMW 1 Series jack located?
Answer: Normally the BMW 1 Series is not equipped with a jack or spare wheel. If run flats are not fitted, i.e. tires capable of supporting the car even in th... Read all

Posted on 20-01-2022

Read answer
Where is the spare wheel on the BMW X1 located?
Answer: The BMW X1 is approved for the spare wheel, but this is an option. If you haven't paid for it, it simply isn't there, but the inflation kit is there i... Read all

Posted on 12-12-2022

Read answer
What sidelights does the BMW 3 Series mount?
Answer: The bulbs needed to replace the positions are common T10 W5W. You can buy them in the main online spare parts shops or in physical stores, such as the... Read all

Posted on 27-02-2022

Read answer
What is the cost for a BMW 1 Series MOT?
Answer: Ordinary maintenance, i.e. coupon or inspection, of the BMW 1 Series costs between 250 and 300 euros when you choose to carry out the intervention at ... Read all

Posted on 22-12-2022

Read answer
How to Remove the Front Wheel of the BMW R 1200 GS?
R 1200 Gs
.. To remove the front wheel of the BMW R 1200 GS, first loosen the bolts securing the front brake caliper to the disc. Once.. .. off the wheel entirely to replace it with a new spare part. The new wheel can be secured by inserting the axle and locking it with the nuts, then reinstalling.. …
R 1200 Gs .. To replace the wheels on a BMW R 1200 GS, perform the same operation for both the front and rear wheels: you will need.. .. brake disc. After all obstructing components have been removed, detach both wheels and replace them with the new spare parts... …
G310 R .. on the right side of the vehicle, near the rear wheel: once the screws securing the exhaust tip have been loosened, it will be possible to proceed by.. .. position so that it can be replaced with a new spare part: the new exhaust can then be properly secured to the supports to verify its operation... …
G310 R .. on the right side of the bike near the rear wheel. Once the mounting screws for the exhaust tip have been removed, you can proceed to widen the ring.. .. position so that it can be replaced with a new spare part: the new exhaust can then be securely fastened to the mounts to ensure everything functions.. …
R 1200 Gs .. the fuel cap and directly below the steering wheel. By opening it, you can unscrew its fixing screws, allowing the glove box to be removed and providing.. .. out from its housing and replaced with a new spare part that should be properly inserted. After installation, you can reinsert the glove box and secure.. …
(*) Write to request page removal

Pagine correlate: