|
Do it yourself
| |||
| ||||
Model: Bmw R 1200 Gs
To remove the front wheel of the BMW R 1200 GS, first loosen the bolts securing the front brake caliper to the disc. Once these bolts are loosened, you can completely remove the caliper and unscrew the nuts securing the wheel's central axle. After this has been removed, you can take off the wheel entirely to replace it with a new spare part. The new wheel can be secured by inserting the axle and locking it with the nuts, then reinstalling the corresponding brake caliper.
Updated on 1 July 2026 by ScegliAuto
Video tutorial
Related tutorials
R 1200 Gs
To replace the wheels on a BMW R 1200 GS, perform the same operation for both the front and rear wheels: you will need to loosen the nut that secures…
R 1200 Gs
To replace the service belt on a BMW R 1200 GS, loosen the bolts securing the panel located at the lower front of the bike, just behind the front whe…
R 1200 Gs
In this guide, we will see the information that will allow us to disassemble and overhaul (or replace) the shaft drive of the BMW R 1200 GS. First, l…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
