|
Do it yourself
| |||
| ||||
Model: Bmw R 1200 Gs
To replace the air filter on the BMW R 1200 GS, you need to lift the glove box located just above the fuel cap and directly below the steering wheel. By opening it, you can unscrew its fixing screws, allowing the glove box to be removed and providing access to the filter underneath. The filter must be taken out from its housing and replaced with a new spare part that should be properly inserted. After installation, you can reinsert the glove box and secure it with the appropriate screws.
Updated on 8 May 2026 by ScegliAuto
Video tutorial
Related tutorials
R 1200 Gs
In this video, you will see how to disassemble and replace the air filter of a BMW R 1200 GS, following these instructions. First, remove the plastic…
R 1200 Gs
Remove the original engine air filter on a BMW R1200GS. Follow this guide video for the replacement procedure. Position the motorcycle on a centre st…
R 1200 Gs
To change the engine oil of the BMW R 1200 GS, remove the bolts securing the engine guard located at the bottom of the bike. Once this is released, y…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
