Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
Searched for Hyundai I30 Rear Bumper Removal - To remove the rear bumper of a Hyundai i30, you will need to open the hood and remove the six rivets that secure the upper part of the bumper lining. Then, take out the caps and unscrew the screws that hold the bumper in place.
Page generated automatically based on user searches (*)
How to remove front bumper on Hyundai I30
Hyundai I30 (2007-2012 / FD, MK 1) .. Is the front bumper of the Hyundai I30 damaged? Let's take it apart and replace it. Let's lift the bonnet and put it in safety...
How do you remove the front headlight of the Hyundai I30?
Hyundai I30 (2007-2012 / FD, MK 1) .. In order to remove the front headlight of the Hyundai I30, you need to open the hood so that you have access to the screws that secure the bumper from..
How to remove the rear seats of the Hyundai I30.
Hyundai I30 (2007-2012 / FD, MK 1) .. will allow us to disassemble and replace the rear seats of the Hyundai I30, following these simple steps. First, we open the rear doors and start..
How to replace the rear light bulb on Hyundai I30?
Hyundai I30 (2011-2016 / MK 2, GD) .. The replacement of the rear light bulb of the Hyundai I30 is carried out by lifting the tailgate, so that the two bolts located next to the headlight..
How to open the hood of the Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) .. will show us how to open the hood of the Hyundai I30, in simple steps. First, we open the front door on the driver's side and start pulling the.. .. go to move the hood lock lever, located near the bumper grille and the hood, as shown in the video. At this point, we lift the hood and secure the rod..
How do you remove the rear bumper of the Hyundai Ix35?
Answer: In order to remove the rear bumper of the Hyundai Ix35 it is necessary to loosen the screws located in the lower part of the bumper itself and inside ... read all

Posted on 14-11-2022

Read Answer
When to change the timing chain of the Hyundai I30?
Answer: The timing for replacing the timing belt of the Hyundai I30 does not differ from those of other cars: it is a maintenance intervention to be carried o... read all

Posted on 31-10-2022

Read Answer
What does the EPB warning light indicate in the Hyundai I30?
Answer: In the Hyundai I30, the EPB warning light refers to the electronic parking brake. If it stays on even though the brake has been released, it means tha... read all

Posted on 27-09-2022

Read Answer
How to replace the exterior mirrors on the Hyundai I30?
Answer: To replace the external rear-view mirrors, the triangular cover located on the inside of the door must be removed in order to disconnect the connector... read all

Posted on 1-04-2022

Read Answer
How to reset the tire warning light in Hyundai I30?
Answer: Resetting the low tire pressure warning light in the Hyundai I30 is extremely easy. A warning message will appear on the display and, after restoring ... read all

Posted on 22-04-2022

Read Answer
(*) This page is automatically generated on the basis of user research and does not in any way express the thought of ScegliAuto.com. If you believe that this page should be removed, write to info@scegliauto.com, specifying the page and the reason why you are requesting the removal.

Pagine correlate:

  1. Video tutorial
    2. >
  2. Hyundai
    3. >
  3. I30
How to Remove the Rear Bumper of a Hyundai i30: To remove the rear bumper of a Hyundai i30, you will need to open the hood and remove the six rivets that secure the upper part of the bumper lining. Then, take out the caps and unscrew the screws that hold the bumper in place. Once the screws are removed, you can carefully remove the bumper cover by unclipping the sides. If it doesn't come off easily, check for any additional screws or clips that may be holding it in place. After removing the bumper, you can proceed with drilling the holes for the reversing sensors if desired. When reassembling, make sure to replace any damaged clips and reinstall the bumper cover using the reverse of the removal procedure.

Information generated automatically based on external sources by AI systems and which may in some cases be inaccurate or incorrect.